Project Summary: Need it by Dec 14 11 AM.As an energy engineer, you are requested to design a hybrid energy system, based on your midterm energy system, as shown in the figure to serve your community to cover the needs for electricity, heat and hot water. You are flexible to identify the loads/capacities in this regard. The renewable heat (QR) should come from either a solar subsystem or a geothermal subsystem. You are free to size these subsystems accordingly. For the combustion chamber each of you need to consider a different fuel (note that H2, NH3 and CH4 are not acceptable). For combustion, the reactants come in at 25oC while the products leave at 995oC which can also be treated as the source temperature. The fuel selected is burned in the combustion chamber with 70% excess air. A 15% of the mass flowrate is extracted from high-pressure turbine into the process heater. The turbine and pumps have an isentropic efficiency of 85%.