Project Summary: Select one of the following problems from chapter 15: 56, 59, 64, 65 Create 3D drawing of the complete assembly Create 3D drawing of each individual component (except standard parts: screws, washer, nuts, springs). Create 1 assembly layout drawing. Create individual component layout drawings. Must include all dimensions with tolerance. One must have symmetric tolerances, one must have deviation tolerances, one must have limit tolerances, and another must have a mix of all 3. You can choose the type of tolerance for any other component drawing. Each component drawing must identify 3 locating datum (A, B, C) and at least 3 different GD&T callouts. Submit 1 dwg for the full assembly ONLY. Submit pdf documents for all drawing layouts (full assembly and individual components), one page or document per drawing layout. Correct layout template must be used.